Content From the perspective of research direction, corporate research and development capabilities include:(1) Basic research capabilities(2) Applied research capabilities (3) Develop research capa...

Technology development capability: refers to the use of existing knowledge obtained from research and practical experience or the introduction of technology from outside to produce new products, devic...

Feature introduction From the perspective of the user: it is used by people to prevent, treat, and diagnose human diseases. Purposeful adjustment of human physiological functions, with prescribed s...

Manufacturing technology development refers to the development of new processes, new technologies, new equipment, and new methods. This is an important means to improve the technical quality of an ent...

The specific definition of each bit is as follows: SM0 SM1SM2REN TB8 RB8 TI RISM0, SM1 are the serial port working mode setting bits, so that the two bits can correspond to the four mode settings. Ser...

Overview Any modern digital circuit system, especially some large digital processing systems, is often impossible to process all the data at once, so in the process of processing Some data and codes...

Introduction Electronic photography (eIectrophotography) uses static electricity and photoelectric effect to record pictures. Electrophotography has the characteristics of high resolution, reliabili...

Introduction General-purpose registers can be used to transfer and temporarily store data, and can also participate in arithmetic and logic operations and save the results of operations. In addition...

DefinitionPSW flag definition:PSW is an 8-bit binary register used to store the relevant CPU after the instruction is received The status is usually filled in by the CPU, but the user can also change...

Development The processor chip invented in 1971 plays a role in defining the computer. Since then, the computer has evolved in accordance with the development of the processor chip. It is the comput...

Optical format The optical format is generally expressed by the ratio of the diagonal length of the photosensitive element, that is, OF=diagonal length/1 inch=diagonal length/16mm. It should be noted...

Processing capacity The processing capacity of the processor has a variety of indicators and parameters. It is usually measured by the fastest million instructions per second (MIPS). For processors...

Introduction The process of corresponding changes in photographic materials when irradiated by light. The photosensitive process of ordinary silver halide emulsion is basically: the silver halide pa...

Working principle Charge Coupled Device image sensor CCD (Charge Coupled Device), which is made of a high-sensitivity semiconductor material, can convert light into electric charge, The digital conve...

Classification The roller frame series has various forms such as self-adjusting, adjustable, flat-car, tiltable, and anti-axial movement. Used for welding, polishing, rubber lining and assembling of...